Intel Pentium III 533EB socket: Socket 370
The Intel Pentium III 533EB uses the Socket 370 socket. It is a 14 W single-core Coppermine desktop part at 533 MHz with 256 KB of full-speed L2 cache, with a Slot 1 cartridge at the same name for older boards.
- Socket
- Socket 370
- Launched
- October 25, 1999
- Cores and threads
- 1 and 1
- Base power
- 14 W
- Codename
- Coppermine
- Segment
- Desktop
- Family
- Intel Pentium III
- Clocks
- 0.53 GHz
Intel Pentium III 533EB specifications
| Cores | 1 |
|---|---|
| Threads | 1 |
| Core architecture | Coppermine (P6) |
| Clocks | 533 MHz base, no turbo |
| Cache | 32 KB L1, 256 KB full-speed L2 |
| Processor base power (TDP) | 14 W |
| Manufacturing process | 180 nm |
| Memory support | SDRAM through the board chipset |
| Front side bus | 133 MHz |
| Package | Socket 370 (FC-PGA, 370 contacts; Slot 1 cartridge also at same name) |
| Multiplier | Locked (4x) |
| Integrated graphics | None |
Motherboard compatibility
Intel Pentium III 533EB needs a motherboard with a Socket 370 socket. Chipset by chipset data for this codename is not recorded yet. See the Socket 370 chipset list and the board maker's CPU support list.
Socket 370 at a glance
| Type | PGA, 370 contacts |
|---|---|
| Package size | 49.53 × 49.53 mm |
| Introduced | 1998 |
| Memory | SDRAM and DDR through the board chipset |
| Cooler mounting holes | Socket lug (clip) |
What the Pentium III 533EB is
The Intel Pentium III 533EB is a 533 MHz single-core desktop processor from October 1999. It runs one P6 Coppermine core at 533 MHz with no turbo, so 1 core gives 1 thread. Cache is 256 KB of full-speed Advanced Transfer Cache with 32 KB of L1 on a 180 nm process. Power is rated at 14 W in a Socket 370 FC-PGA package on a 133 MHz front side bus with a 4x multiplier at 1.65 V.
A Slot 1 SECC2 cartridge carries the same 533EB name at 533 MHz for boards without a socket, which is why two pages would share the model line across packages. This page covers the socketed FC-PGA package as primary; the cartridge suits Slot 1 retention boards. The chip supports MMX and SSE.
The B suffix marks the 133 MHz bus revision against 533 MHz E-models on 100 MHz paths, which is why 533EB boards need 133 MHz tables. That is why the 533EB shipped in early 133 MHz Socket 370 towers.
Socket and motherboard compatibility
The 533EB fits Socket 370 early desktops with Coppermine support. It needs a 370-pin board with a 133 MHz bus and a BIOS that lists Pentium III 533EB. The Socket vs chipset: what decides whether a CPU works guide covers pairing rules.
Early 133 MHz SDRAM towers are the natural match. Boards listing the 533EB accept the chip with a 14 W cooler. Slot 1 boards take the cartridge twin.
Memory, PCIe and cooling
Memory is SDRAM through the board chipset, matched to the board sockets. The CPU has no memory controller. Early 133 MHz boards commonly run PC133 pairs.
A 133 MHz front side bus ties the CPU to the chipset, while AGP and PCI hang off the chipset. No PCIe lanes originate on the die. Cooling uses the Socket 370 lug clip with a 14 W cooler.
Upgrade paths
On the same socket, a Pentium III 600E on the same support list adds clocks at similar power. A 533 MHz E-model on a 100 MHz bus is the slower-bus twin.
A move to Tualatin needs a Tualatin-ready board. The Socket 370 page lists the Coppermine to Nehemiah range, with Slot 1 for cartridges.
Frequently asked questions
What socket does the Pentium III 533EB use?
Socket 370 in an FC-PGA package. A Slot 1 cartridge exists at the same name.
What does the B suffix mean?
The B suffix marks the 133 MHz bus revision. E-models without B run a 100 MHz bus at matching clocks.
What memory does the 533EB use?
SDRAM through the board chipset.
What is the upgrade path from the 533EB?
A Pentium III 600E on the same support list.
Sources and verification
- List of Intel Pentium III processors 533EB 14W (Wikipedia)
- Socket 370 Coppermine FC-PGA (Wikipedia)
- Pentium III Coppermine Slot SECC2 (JMediaWiki)
Facts last checked against these sources on . Page last edited on .