Intel Mobile Pentium III 450 socket: Socket 495

The Intel Mobile Pentium III 450 uses the Socket 495 socket. It is a 15.5 W single-core Coppermine mobile part at 450 MHz with 256 KB of L2 cache for Socket 495 laptops, with soldered and module twins at the same name.

Launched
October 25, 1999
Cores and threads
1 and 1
Base power
15.5 W
Codename
Coppermine
Segment
Mobile (socketed)
Clocks
0.45 GHz

Intel Mobile Pentium III 450 specifications

Cores1
Threads1
Core architectureCoppermine (P6)
Clocks450 MHz base, no turbo
Cache32 KB L1, 256 KB full-speed L2
Processor base power (TDP)15.5 W
Manufacturing process180 nm
Memory supportSDRAM through the board chipset
Front side bus100 MHz
PackageSocket 495 (micro-PGA2, 495 pins; BGA and MMC twins also at same name)
MultiplierLocked (4.5x)
Integrated graphicsNone

Motherboard compatibility

Intel Mobile Pentium III 450 needs a motherboard with a Socket 495 socket. Chipset by chipset data for this codename is not recorded yet. See the Socket 495 chipset list and the board maker's CPU support list.

Socket 495 at a glance

TypePGA, 495 contacts
Package sizen/a
IntroducedOctober 1999
MemorySDRAM through the board chipset
Cooler mounting holesBoard specific (vendor heat pipe)

Read the full Socket 495 socket guide

What the Mobile Pentium III 450 is

The Intel Mobile Pentium III 450 is a 450 MHz single-core mobile processor from October 1999. It runs one P6 Coppermine core at 450 MHz with no turbo and no SpeedStep, so 1 core gives 1 thread. Cache is 256 KB of full-speed L2 with 32 KB of L1 on a 180 nm process. Power is rated at 15.5 W max in a Socket 495 micro-PGA2 package on a 100 MHz front side bus with a 4.5x multiplier at 1.6 V.

Micro-BGA2 soldered cards and MMC-2 modules carry the same Mobile 450 name at 450 MHz for thinner boards, which is why three pages share the model line across packages. This page covers the socketed micro-PGA2 package per the socketed-only rule; a 450 MMC module such as Intel Mobile Pentium III 450 MMC has its own page. The chip supports MMX and SSE with QuickStart.

Entry mobile clocks with a full cache suit Socket 495 value laptops with SDRAM. The 4.5x ratio is standard for 100 MHz mobile boards. That is why the 450 shipped in budget mobile systems.

Socket and motherboard compatibility

The 450 fits Socket 495 value laptops with Coppermine support. It needs a 495-pin micro-PGA2 board with a 100 MHz bus and a BIOS that lists Mobile Pentium III 450. The Socket vs chipset: what decides whether a CPU works guide covers pairing rules.

Value SDRAM laptops are the natural match. Boards listing the Mobile 450 accept the chip with a 15.5 W pipe. Soldered and module boards take their own forms.

Memory, PCIe and cooling

Memory is SDRAM through the board chipset, matched to the board slots. The CPU has no memory controller. Value boards commonly run PC100 pairs.

A 100 MHz front side bus ties the CPU to the chipset, while AGP and PCI hang off the chipset. No PCIe lanes originate on the die. Cooling uses the laptop heat pipe for the exact chassis, rated for 15.5 W.

Upgrade paths

On the same socket, a move to a Mobile Pentium III 500 such as Intel Mobile Pentium III 500 keeps the laptop for 50 MHz more. A 450 MMC module is the card twin on module boards.

A move to SpeedStep models needs battery-mode BIOS tables. The Socket 495 page lists the mobile range for planning.

Frequently asked questions

What socket does the Mobile Pentium III 450 use?

Socket 495 in a micro-PGA2 package. Soldered BGA2 and MMC-2 module twins exist at the same name.

What memory does the 450 use?

SDRAM through the board chipset.

What is the upgrade path from the 450?

A Mobile Pentium III 500 on the same support list.

Sources and verification

  1. List of Intel Pentium III processors Mobile 450 15.5W (Wikipedia)
  2. Mobile Intel Processor Package Types micro-PGA2 (Intel)
  3. Pentium III Coppermine mobile BGA PGA (CPU-World)

Facts last checked against these sources on . Page last edited on .