AMD FX-9370 socket: AM3+

What the FX-9370 is

AMD FX-9370 is a eight core processor that AMD released in June 2013, as part of the Vishera generation on AM3+. Vishera uses the Piledriver core design on a 32 nm process, with a base clock of 4.4 GHz and turbo up to 4.7 GHz. The cache is 8 MB L2 and 8 MB L3. The thermal rating is 220 W, and there are no integrated graphics, so a separate card is required.

The 8 cores sit in four modules. Each module holds two integer cores that share part of the front end. That layout explains why core counts read high while single thread behavior tracks clock speed closely. Threads equal cores at 8, since Piledriver has no simultaneous multithreading. The 32 nm silicon pairs with ddr3 up to 1866 mt/s, two channels on boards with four DIMM slots in most ATX designs.

At 220 W the FX-9370 belongs to the Extreme FX group of the FX line. The 4.4 GHz base and 4.7 GHz turbo place it near the top of the eight core range. Buyers in June 2013 paired it with 9 series boards and DDR3-1866 kits. The Socket vs chipset: what decides whether a CPU works guide explains how AMD chipset series map to BIOS needs.

Socket and motherboard compatibility

The FX-9370 fits AM3+, which has 942 contacts for a processor with pins. The chipsets built for the socket are the 9 series: 990FX, 990X and 970. Many boards shipped before June 2013, so the BIOS may not know the chip. The update has to be installed before the new processor goes in, using an older supported chip where needed. Check the board maker CPU support list and confirm the FX-9370 with a minimum BIOS version.

Power delivery matters as much as the chipset on this 220 W part. Boards with small voltage regulators may not list the FX-9370 as supported, or may run hot under load. A board that lists the chip at 220 W is the safe choice. The CPU cooler compatibility by socket guide explains mounting patterns. AM3+ shares a 48 by 96 mm pattern with AM2 and AM3, while AM4 uses a different spacing.

Memory, PCIe and cooling

Memory support is ddr3 up to 1866 mt/s, two channels across two channels. Boards commonly offer four DIMM slots on ATX and two on micro ATX. Two matched modules give the rated bandwidth, which also feeds the graphics block on APU models. There is no DDR4 option, so a move to DDR4 means leaving the socket.

PCI Express comes from the chipset, not from the FX die. The processor links to the chipset over HyperTransport, and graphics slots hang off the board. The 990FX chipset supports several graphics cards and is the usual pick for multi graphics systems on this socket. Storage standards beyond SATA follow the board as well. Anything newer needs a new platform.

Cooling for the 220 W FX-9370 needs headroom. A 240 mm liquid cooler or a top tier tower with strong case airflow is the practical minimum, and the case needs exhaust to match. The chip ships without a stock cooler in most listings, so budget for cooling separately. The 48 by 96 mm mounting pattern carries over from AM2 and AM3.

Upgrade paths

Within AM3+ the FX-9370 sits near the top of the stack, with only binned variants above it. Faster FX models need boards with stronger power stages, so the board list matters again. Used 990FX boards with heatsinked regulators are the usual base for a same socket move.

A real upgrade means a new platform. AMD moved mainstream desktops to AM4 with DDR4 memory and a different pin layout, and a processor like AMD FX-8350 shows the change in design. That move needs a new board, new memory and often a new cooler bracket. Keep the AM3+ system for secondary duty or retire it whole, since parting out DDR3 and 9 series boards returns little.