Intel Celeron P1053 socket: LGA 1366
The Intel Celeron P1053 uses the LGA 1366 socket. It is a 30 W single core Jasper Forest storage processor at 1333 MHz with Hyper-Threading and 2 MB of cache for embedded storage platforms.
- Socket
- LGA 1366
- Launched
- February 2010
- Cores and threads
- 1 and 2
- Base power
- 30 W
- Codename
- Jasper Forest
- Segment
- Server
- Family
- Intel Celeron
- Clocks
- 1.33 GHz
Intel Celeron P1053 specifications
| Cores | 1 |
|---|---|
| Threads | 2 |
| Core architecture | Jasper Forest cores on 45 nm |
| Clocks | 1333 MHz (no turbo) |
| Cache | 2 MB |
| Processor base power (TDP) | 30 W |
| Manufacturing process | 45 nm |
| Memory support | DDR3 ECC (board dependent) |
| PCI Express | PCIe from the board chipset |
| Integrated graphics | None |
| Multiplier | Locked |
| Package | LGA1366 |
Motherboard compatibility
Intel Celeron P1053 needs a motherboard with a LGA 1366 socket. Chipset by chipset data for this codename is not recorded yet. See the LGA 1366 chipset list and the board maker's CPU support list.
LGA 1366 at a glance
| Type | LGA, 1,366 contacts |
|---|---|
| Package size | n/a |
| Introduced | 2008 |
| Memory | DDR3 triple channel, up to 24 GB on desktop boards |
| Cooler mounting holes | 80 × 80 mm |
What the Celeron P1053 is
The Intel Celeron P1053 is a single core Jasper Forest storage processor from February 2010. It runs one Nehalem class core at 1333 MHz with Hyper-Threading for two threads, backed by 2 MB of cache. Power is rated at 30 W on a 45 nm process on LGA 1366.
Jasper Forest is the Nehalem based storage family in Xeon C5500 and C3500 clothes with a Celeron entry model for control plane work. The P1053 covers single threaded storage tasks where a full Xeon would idle. Per-SKU details beyond the task list survive in few open sources, so this page stays close to the listed clocks, cache and power.
There is no graphics on this die. Display and I/O come from the storage board chipset.
Socket and motherboard compatibility
The Celeron P1053 fits LGA 1366 with 1366 lands. Storage boards with Jasper Forest firmware boot it directly. Check the vendor CPU list because retail X58 boards rarely list storage SKUs.
The socket compatibility table carries no per-codename claim for Jasper Forest, so the page shows the neutral sentence. The Socket vs chipset: what decides whether a CPU works guide covers pairing rules, and the Intel Xeon LC3528 page shows the dual core storage sibling.
Memory, PCIe and cooling
Memory is DDR3 ECC through the board design for storage integrity. The board fixes the population, so check the vendor list.
PCIe comes from the board chipset for storage controllers and networking.
Cooling uses a server heatsink rated for 30 W on the 80 × 80 mm pattern with threaded backplates on server boards.
Upgrade paths
On LGA 1366 the storage upgrade is a dual or quad Jasper Forest such as the LC3528 on the same board. Beyond the storage platform a move to Xeon 5600 series needs a standard server board.
Frequently asked questions
What socket does the Celeron P1053 use?
LGA 1366, the 1366-land package on storage boards with Jasper Forest firmware.
How many cores does the Celeron P1053 have?
One core and two threads at 1333 MHz with 2 MB of cache.
What memory works with the Celeron P1053?
DDR3 ECC through the board design.
Sources and verification
Facts last checked against these sources on . Page last edited on .