AMD E1-6010 socket: Socket FT3
The AMD E1-6010 uses the Socket FT3 socket as a soldered BGA chip and cannot be replaced. It is a dual core Beema APU at 1.35 GHz and 10 W with Radeon R2 graphics.
- Socket
- Socket FT3
- Launched
- April 2014
- Cores and threads
- 2 and 2
- Default TDP
- 10 W
- Codename
- Beema
- Segment
- Mobile (soldered)
- Family
- AMD E1
- Clocks
- 1.35 GHz
AMD E1-6010 specifications
| Cores | 2 |
|---|---|
| Threads | 2 |
| Core architecture | Puma cores on 28 nm |
| Clocks | 1.35 GHz (no boost) |
| Cache | 1 MB L2 cache |
| Processor base power (TDP) | 10 W |
| Manufacturing process | 28 nm |
| Memory support | DDR3L-1333, single channel |
| PCI Express | PCIe 2.0, up to 8 lanes |
| Integrated graphics | AMD Radeon R2 (260 MHz to 350 MHz) |
| Multiplier | Locked |
| Package | Socket FT3 (BGA769, soldered) |
Motherboard compatibility
AMD E1-6010 needs a motherboard with a Socket FT3 socket. Chipset by chipset data for this codename is not recorded yet. See the Socket FT3 chipset list and the board maker's CPU support list.
Socket FT3 at a glance
| Type | BGA, 769 contacts |
|---|---|
| Package size | 24.5 × 24.5 mm |
| Introduced | May 2013 |
| Memory | DDR3-1600, one or two channels, ECC on selected designs |
| Cooler mounting holes | Not applicable (soldered) |
What the E1-6010 is
The E1-6010 opens Beema entry notebooks on Socket FT3 with lower power than Kabini. It runs 2 Puma cores and 2 threads at a fixed 1.35 GHz with 1 MB of L2 cache. Power is 10 W on 28 nm from April 2014. Puma lifts per clock speed over Jaguar at similar watts.
Two cores cover browsing with a document open. Fixed clocks keep behavior steady in shared machines. The 10 W envelope suits fanless leaning thin bodies. The soldered package means the notebook brand decides screen and battery around the chip.
Radeon R2 with 128 shaders from 260 MHz to 350 MHz drives notebook panels for video. DDR3L-1333 over one channel feeds cores and graphics. Buyers pick the E1-6010 where Beema efficiency must cost the least.
Socket and motherboard compatibility
The E1-6010 solders to the board on Socket FT3 and cannot be replaced. Memory size locks at purchase on most bodies. Boards wire SODIMM DDR3L with eDP panels.
FT3 notebooks use SoC PCIe, SATA and USB. AM1 desktops cannot take this BGA chip. The LGA, PGA and BGA: CPU package types explained guide explains soldered limits.
Memory, PCIe and cooling
DDR3L-1333 over a single channel suits 10 W notebooks. One SODIMM covers classroom browsing. Single channel is fixed by the SoC.
PCIe 2.0 with up to 8 lanes from the SoC serves storage and radios. eMMC or small SSDs match the class. Most builds stay on R2 graphics.
Cooling follows the thin notebook design for 10 W. Quiet libraries suit the fixed clock. Keep vents clear in carts.
Upgrade paths
On the same socket, the AMD E2-6110 at 1.5 GHz with four cores above doubles threads, while Kabini E1 parts cover older bodies. All share FT3 boards.
Newer entry portables moved to Stoney Ridge. The E1-6010 holds Beema dual core duty at 10 W.
Frequently asked questions
What socket does the AMD E1-6010 use?
It uses Socket FT3 as a soldered chip.
How many cores does the E1-6010 have?
Two cores and two threads at 1.35 GHz with 1 MB of L2 cache.
Which graphics does the E1-6010 include?
AMD Radeon R2 from 260 MHz to 350 MHz.
What is the TDP of the E1-6010?
10 W.
Sources and verification
Facts last checked against these sources on . Page last edited on .